saturalabs

Saturalabs / Specific distractions

Remove keyboard noise. Keep the explanation.

Try reducing typing clicks in a recorded tutorial, voiceover, or meeting. Choose whether to separate the keyboard itself or bring the speaking voice forward, then check the words that overlap each click.

Start with your recording

The track you’re looking for

Background audio

The remaining recording with the requested typing separated. Review speech for lost detail.

Your recording. Your sound.

Name one audible source. You can edit this prompt before running the separation.

For this example, keepBackground audio

Uploading opens the editor. Downloads require an account and credits. View pricing.

A focused approach

Typing clicks and speech can share sharp attacks

Keyboard noise is often a series of short transients rather than a steady hum. A generic background-noise request may not describe it well. Start with ‘The keyboard typing clicks’ and keep Background audio for the remainder, especially when you want to preserve speech plus other useful scene sound.

For a tutorial where only the spoken explanation matters, try ‘The main person speaking’ and keep Isolated sound instead. Compare the two approaches around consonants and clicks. A result with fewer sharp sounds can still be worse if it removes parts of the speaker's words.

Choose by where the clicks occur

Which keyboard noise removal method fits your recording?

A click in a pause is a different editing problem from a key press over a spoken word. Keep the original and locate both before processing.

What you hearA starting methodWhat to protect
A few clicks between spoken phrasesLower just those intervals in an audio editor. Preserve their duration when the recording must stay in sync.Breaths, room tone, and the start of the next word. An abrupt silent gap can sound distracting.
Quiet typing mostly in pausesTest gentle gating if a level threshold can distinguish the pauses from wanted speech.Soft words and sentence endings. Loud key presses can open a gate, and typing during speech can pass through.
Repeated key presses overlapping speechTry the keyboard-targeted separation below and review Background audio. For speech alone, compare a voice-targeted test from the original.Consonants at each overlap and any other wanted sounds. A quieter click is not useful if the word is damaged.
A single tiny spike or damaged fragmentInspect a local click-repair tool in an editor before processing the whole take.The surrounding attack. A keyboard clack can be broader than a repair tool supports.

For example, suppose a typing burst ends before a narrator begins the next sentence. Lowering that interval can preserve the complete sentence without separating it. If the final key press overlaps the first consonant, the same edit would lower part of the word too. Include that boundary in your comparison rather than evaluating only a quiet pause. This is an illustrative edit, not a measured separation result.

For quiet clicks in pauses, try the free local noise gate on an MP3 or WAV. Set a threshold and compare the actual exported WAV with the original. Include a quiet word and a typing overlap in the test: gating can reduce wanted speech too and does not identify keyboard sounds.

Audacity documents a Noise Gate that reduces audio below a chosen threshold. It changes level rather than identifying a keyboard. Its Click Removal documentation also notes that some clicks are outside the effect’s scope and that excessive detection can damage wanted audio. Neither effect guarantees removal of every typing sound.

If the problem begins only after cutting or joining the file, inspect the edit boundary first. The guide to clicks after audio cuts distinguishes that problem from a key press already present in the recording.

Recorded cleanup or microphone suppression?

For live calls, choose a live microphone workflow.

Saturalabs processes uploaded recordings. It does not install a virtual microphone or filter a live meeting, Discord call, or stream. Use your calling or recording application's microphone controls for a live session, then check a test call or recording rather than assuming the filter keeps every word.

The microphone and live-call guide covers input selection, placement, documented Zoom and Teams controls, and a typing-plus-speech comparison.

For a recorded call, tutorial, or voiceover, use the upload workflow on this page. If you replace audio in a screen recording, preserve its timing and follow the video audio replacement guide. Downloading a WAV does not automatically replace the video's soundtrack.

Before the next take

How to reduce keyboard noise in your microphone recording

Make a short test before recording a full tutorial or call. Include typing on its own, normal speech, and speech while typing so you can hear what changes at each overlap.

  1. 01 / POSITION

    Bring the microphone closer to your voice

    Follow your microphone's placement instructions. RØDE suggests roughly 5–10 cm from the mouth for its guidance on keyboard noise, allowing lower gain while keeping speech prominent. Check for breath pops and overloaded peaks after moving it.

  2. 02 / COMPARE

    Change one setting, then repeat the same test

    Use the same phrase and typing pattern. Compare speech and clicks together at a similar listening level. Simply lowering the whole recording makes both quieter; listen for a better balance between them.

  3. 03 / CHECK

    Test microphone suppression with soft words too

    If your recording application offers suppression or a gate, compare it enabled and disabled. Include sentence endings and quiet words. A gate can quiet pauses while letting typing through during speech, so an empty pause alone is not a sufficient test.

See RØDE's keyboard-noise and microphone-placement guidance. These are capture checks for your next recording; they do not alter an existing file. If the clicks are already recorded, choose a method from the cleanup comparison above.

From mix to source

How to remove keyboard noise

  1. Upload the recorded session

    Use MP3, WAV, MP4, or MOV up to 50 MiB (52.43 MB). For a long tutorial, export the section that needs work rather than repeatedly processing an entire session.

  2. Describe the keyboard sound

    Try ‘The keyboard typing clicks.’ For voice-only content, try a separate voice-targeted request. Describe a source already in the recording instead of instructing the tool to repair every distraction.

  3. Check clicks that overlap words

    Keep Background audio after targeting typing. Replay words spoken at the same time as a key press, particularly sharp consonants and quiet endings.

  4. Use the result in your edit

    Download the chosen WAV after review. For a screen recording, align it with the video in your editor, compare sync, and adjust levels before the final export.

Be specific about the sound

A prompt for the result you want

Describe the source, then choose the output that matches your goal. These are starting points to try with your own recording.

Your goalTry this promptKeep this track
Reduce typing in the recordingThe clicks are the unwanted target; keep the remaining mix.The keyboard typing clicksBackground audio
Keep only the speakerTry when other scene sound is not needed in the edit.The main person speakingIsolated sound
Reduce audible mouse clicksA separate target when the distracting clicks come from the mouse.The mouse clicking soundsBackground audio

For a custom target, prepare a sound description and choose the output to inspect. The helper opens in a new tab so you can keep your selected recording here.

Made for a real next step

Put the separated audio to work

Software tutorials

Try reducing typing under a recorded explanation while keeping the words understandable. Decide whether some clicks are useful cues for the viewer.

Recorded meetings

Focus on speech in a recording with nearby typing. Check quieter participants and overlapping voices before selecting an output.

Voiceover corrections

Work on a recorded take that contains occasional key presses. Preserve the original so you can compare the voice's tone and articulation.

Listen before you commit

Three checks worth making

Compare a quiet passage and a busy passage with the original, at a similar listening level.

  • Consonants

    Replay words with sharp attacks. Click reduction should not make the explanation harder to understand.

  • Overlapping key presses

    Clicks during speech are a different test from clicks in silence. Listen to both before deciding that the recording is improved.

  • Useful action cues

    For a tutorial, decide whether removing clicks makes demonstrated actions harder to follow. Some original context may be helpful.

Know the limits

Recorded cleanup does not replace a quieter capture setup

The separated remainder may retain clicks or alter speech that overlaps them. Loud key presses close to the microphone can obscure voice detail. No request guarantees that every click will disappear while every consonant remains untouched.

Saturalabs processes uploaded recordings; it is not a live microphone filter for calls or streams. For future sessions, move the microphone away from the keyboard and closer to the speaker where practical, then check a short recording before the full take.

Before you start

A few useful answers.

For download credits and account options, see pricing.

Can I remove keyboard clicks from recorded audio?

You can try targeting keyboard typing clicks and keeping Background audio. Alternatively, isolate the speaker for a voice-only output. Compare the words that overlap the clicks.

Does this work in real time during a call?

No. Saturalabs separates sound from an uploaded audio or video recording. It is not a live microphone noise filter.

Can I remove mouse clicks too?

You can try naming mouse clicking sounds in a separate request. Different click sources may require different descriptions, and clicks overlapping speech can remain difficult to separate.

Why did some spoken words lose detail?

Clicks and consonants can both have sharp attacks. Separation may affect the wanted voice when those sounds overlap. Compare a voice-targeted output and the original before choosing the result.

Can I clean a screen-recording video?

MP4 and MOV are supported up to 50 MiB (52.43 MB). The output is separated audio; import the chosen WAV into your video editor and align it with the original recording.

Start with a sound you know

Bring your own recording.

Describe one source. Listen to both tracks. Keep what works for your project.

Upload your recording