saturalabs

Free tools for your next audio edit

Free audio trimmer. Keep the part that matters.

Cut a voice recording, song excerpt, or sound effect down to the section you need. Choose an MP3 or WAV, set the start and end, then preview and download a WAV or re-encoded MP3. Your audio stays in this browser.

No account neededNo audio uploadWorks in your browser
Prepare a better test clip
Audio trimmerFree · no sign-up
Download format

Your audio file stays in this browser for trimming. Nothing is uploaded by this tool. Choose a 48 kHz, 16-bit PCM WAV or a re-encoded 48 kHz MP3. Original tags and artwork are not copied. MP3 encoding uses a separate local worker; encoder credits and source are below.

Three steps, one useful excerpt

How to trim audio online

Start with a recording you are allowed to edit. Keep an untouched original so you can change the cut later.

  1. 01 / OPEN

    Choose your MP3 or WAV

    Select a mono or stereo recording no longer than 5 minutes and no larger than 50 MiB. The browser reads the file locally and shows its duration and a waveform overview.

  2. 02 / SELECT

    Set the start and end

    Enter times in seconds or adjust the two sliders. Keep a little breathing room around words, notes, and effects. The selection duration and WAV size update as you edit.

  3. 03 / LISTEN

    Preview, then download

    Choose WAV or MP3, prepare the file, and listen to both cut edges in its preview. Download that same file when the boundaries sound right. Change the times to make a different version.

A time edit, with clear boundaries

Cut the recording without cutting the thought.

A useful audio cut begins just before the sound you need and ends after it has finished. For speech, that includes the first consonant and the end of the last word. For a sound effect, it includes the initial hit and the decay that makes the sound recognizable. A waveform helps locate activity, but listening tells you whether the excerpt makes sense.

The optional 5 ms fade softens the very edges of the exported clip. It can reduce an abrupt cut click, but it cannot repair distortion inside the recording. For separate fade lengths or a longer entrance or ending, use the free audio fade tool on your downloaded excerpt. Disable the trimmer’s edge fade when you need to keep a transient at the exact boundary, or move the cut slightly earlier so the fade happens before the sound you want.

This editor makes one continuous excerpt. It does not join clips, remove a section from the middle, change tempo, or cut a video. Use the free audio joiner to assemble prepared clips into a new sequence. Use a multitrack or video editor for layered sound and timeline edits. For overlapping sounds inside the selected time range, try voice isolation or a sound effect extraction workflow.

Know your download

Choose a WAV or MP3 download.

Choose by your next edit

WAV exports 48 kHz, 16-bit PCM. MP3 re-encodes at 48 kHz with a 128, 192, or 320 kbps setting. Both keep the decoded mono/stereo channel count and apply the selected cut and optional edge fade. Neither is a lossless compressed-frame cut, and a higher MP3 bitrate does not restore missing source detail.

Check size before export

WAV is uncompressed here. A short WAV can be larger than a longer MP3. The panel shows the exact WAV size or an MP3 payload estimate, then the actual encoded file size after preparation. A WAV above 50 MiB needs a shorter selection. MP3 can be smaller but includes new encoding loss. Use the audio file size calculator to compare export settings. The MP3 versus WAV guide explains the size difference and what conversion can change.

Download before leaving

Your file and cut are held in browser memory for this session. Reloading or closing the page clears the editor. Save the chosen file to your device and keep notes of the original start time if you will align the excerpt with a longer recording.

Check the real encoded file

MP3 timing can differ from the selected range.

MP3 encoders can add delay and end padding. In our synthetic mono and stereo checks, a one-second selection produced files reported as 1.032 seconds by FFprobe. That is a result for these test files, not a universal correction offset. Listen to the actual MP3 preview and check its placement if you use it with picture. Choose WAV for more predictable sample timing.

MP3 export runs in a local worker, and the encoder script loads only when you prepare an MP3. You can cancel an export; cancelling does not return a partial file. Original tags and artwork are not copied. Neither format removes sounds mixed together inside the selected range.

MP3 encoder credits

Built with the LAME encoder via lamejs.

The optional MP3 download uses lamejs 1.2.1 by Alex Zhukov, a JavaScript port of the LAME MP3 encoder. Its unmodified script is served separately. See the attribution and source notes, upstream license notice, LGPL-3.0 and GPL-3.0 texts, and complete upstream source package.

Build a new playback sequence

Join your prepared clips into one file

Arrange short MP3/WAV excerpts, add a deliberate pause if needed, and review each join.

A few useful answers

Free audio trimmer questions

Is this audio trimmer really free?

Yes. Trimming, previewing, and downloading either format are free and do not require an account. Saturalabs’ separate AI audio isolation service has its own account and credit flow; using this trimmer does not start a separation job.

Can I cut an MP3 and download an MP3?

Yes. Choose MP3 download and a bitrate of 128, 192, or 320 kbps. The selection is decoded and re-encoded locally, not copied losslessly. Preview the resulting MP3 before downloading. WAV remains available for an editable PCM copy and more predictable timeline alignment.

Does my recording get uploaded?

The trimmer reads and edits your selected file locally in this browser. It does not upload the audio to Saturalabs. Keep your original file and download your cut before leaving or reloading the page; the editor does not save your recording for later.

Why won’t a file open?

This editor accepts mono or stereo MP3 and WAV recordings up to 50 MiB and 5 minutes. A WAV container can hold different audio codecs, and browser support varies. Try a standard PCM WAV or MP3 export, or a shorter recording if your device runs out of memory.

Does trimming remove background noise or separate vocals?

Trimming keeps one time range of the complete mix. Every sound inside that range remains. To separate a voice, instrument, or unwanted sound that overlaps the wanted audio, use one of Saturalabs’ AI audio tools after preparing your clip.

Which format should I use for a video edit?

WAV is the better starting point when precise sample timing matters. MP3 encoding can add delay or padding, even for a short cut. Keep the original excerpt start time and check the chosen audio against the video before the final export.

Will the cut preserve the exact original audio data?

No. The browser decodes the source at 48 kHz. WAV exports 16-bit PCM; MP3 applies a new lossy encode and may add codec delay or padding. The optional 5 ms edge fades change the boundaries before encoding. Original tags, artwork, and other metadata are not copied.

After preparing your audio

Focus on the sound inside it.